User Manual Q&AAnswer
Feb 28, 2025 - 12:22 AM
To replace the batteries in the MOB MO8940 Thumb Up Keychain, follow these steps:
1. Locate the battery compartment on the keychain. It is usually located on the back or bottom of the keychain.
2. Use a small screwdriver or coin to open the battery compartment. Insert the tool into the slot and twist it counterclockwise to unlock and open the compartment.
3. Inside the battery compartment, you will find three LR41 batteries. Take note of their orientation and how they are inserted.
4. Remove the old batteries by gently pushing them out from their slots or by using a small tool to pry them out.
5. Insert the new LR41 batteries into the slots, making sure to align them correctly according to the polarity markings (+ and -) indicated inside the compartment.
6. Once the new batteries are in place, close the battery compartment by aligning the tabs or grooves and twisting it clockwise until it locks securely.
7. Test the keychain by pressing the button or activating the LED beam. If the keychain does not work, double-check the battery orientation and ensure they are inserted correctly.
Remember to dispose of the old batteries properly and follow any local regulations for battery recycling.
For more detailed instructions or troubleshooting information, you can refer to the user manual available at www.momanual.com.
Add New Comment