User Manual Q&AAnswer
Feb 27, 2025 - 11:59 PM
To install the astro Kinzo 140, please follow the instructions provided in the manual carefully. Here is a step-by-step guide:
1. Before starting the installation, ensure that the power supply is switched off to avoid any electrical hazards.
2. Identify the electrical wires in your installation. The live wire is normally brown or red, the neutral wire is normally blue or black, and the earth wire is normally green or yellow.
3. Connect the live wire from your electrical supply to the live terminal of the astro Kinzo 140. This is typically indicated by the letter "L" or a symbol.
4. Connect the neutral wire from your electrical supply to the neutral terminal of the astro Kinzo 140. This is typically indicated by the letter "N" or a symbol.
5. Connect the earth wire from your electrical supply to the earth terminal of the astro Kinzo 140. This is typically indicated by the letter "E" or a symbol.
6. Once all the connections are secure, you can switch on the power supply and test the functionality of the astro Kinzo 140.
Please note that if you are unsure about any aspect of the installation process, it is recommended to consult a qualified electrician or contact the manufacturer or their service agent for assistance.
Add New Comment