User Manual Q&AAnswer
Feb 27, 2025 - 11:54 PM
To set the mode on the INTERMATIC P1353ME 3 Circuit Pool/Spa Digital Time Switch, follow these steps:
1. Press and hold the MODE button on the front of the mechanism for about 5 seconds using a small pointed tool (e.g., pen, pencil, screwdriver).
2. Use the Up and Down arrow keys to cycle through the available modes. Each mode has specific programming, timing, and lockout features designed for different types of pool or spa equipment.
3. As you cycle through the modes, the display will show the circuit outputs defined for each mode. This will help you understand how each circuit will function in the selected mode.
4. Once you have selected the desired mode, press and release the ENTER button to save the mode number to memory and exit the mode selection programming.
It is important to fully understand each mode's definitions and installation requirements before selecting the appropriate mode for your pool or spa equipment. If you are unsure about the mode selection or need further assistance, it is recommended to consult a qualified installer or refer to the instruction manual for more detailed information.
Add New Comment