User Manual Q&AAnswer
Feb 27, 2025 - 11:43 PM
To properly waterproof the AllyNav R26 Geodetic GNSS Receiver for outdoor installation, follow these guidelines:
1. Ensure that the receiver and all related accessories are adequately protected from water ingress. This includes the R26 receiver itself, the GNSS antenna, and any connecting cables.
2. Use waterproof enclosures or protective cases for the receiver and accessories. These enclosures should have appropriate IP (Ingress Protection) ratings to ensure water resistance.
3. Seal all cable connections and entry points to prevent water from entering the receiver or accessories. This can be done using waterproof tape, silicone sealant, or other suitable waterproofing methods.
4. When installing the GNSS antenna outdoors, make sure it is placed in an open-air environment to avoid any obstructions that may affect signal reception. Ensure that the antenna is securely mounted and properly waterproofed.
5. Take appropriate lightning protection measures when installing the antenna outdoors to prevent damage from lightning strikes. Consult with a professional or refer to lightning protection guidelines for best practices.
It is important to note that while these guidelines can help protect the receiver from water damage, they do not guarantee complete waterproofing. It is always recommended to consult the user manual or contact the manufacturer for specific instructions and recommendations on waterproofing the AllyNav R26 Geodetic GNSS Receiver for your specific application.
Add New Comment