User Manual Q&AAnswer
Feb 27, 2025 - 11:24 PM
Here is a step-by-step guide on how to install the hama 00176607 WiFi Wall Light:
1. Switch off the relevant fuse for the room where you want to install the light.
2. Use a suitable measuring device, such as a multimeter, to check that the wires are de-energized.
3. Pull the housing of the light upwards and off.
4. Loosen the grub screws on the side of the light using the Allen key provided.
5. Pull the wires through the hole on the mounting plate and attach the insulation tubes. The tubes should cover the connecting cable inside the light up to the terminals. Shorten any connecting wires that are too long.
6. Insulate the cables as specified on the terminals (10 mm).
7. Attach the mounting plate to the wall using the screws and dowels provided.
8. Connect the wires to the light terminals, ensuring that the seal is correctly inserted.
9. Place the wall light on the mounting plate and tighten the grub screws on the side.
10. Push the housing back onto the wall light.
Please note that it is important to follow all safety instructions and consult a qualified electrician if needed. For more detailed instructions, you can refer to the full manual available for download on the Hama website (www.hama.com) under the product's specific page (00176607).
Add New Comment