Answer

Feb 27, 2025 - 11:13 PM
To connect the HENRAC TECH TY-DIY-S04 WiFi Smart Control to your smartphone, please follow these steps:
1. Make sure your USB power adapter has an output of more than 800mA.
2. Ensure that your smartphone or tablet is connected to a 2.4G WiFi internet.
3. If you have a 5G router, select the 2.4G WiFi signal to connect your smartphone.
4. Download and install the Tuya Smart APP or Smart Life APP from the APP Store or Google Play Store. Register and log in.
5. During the pairing process, ensure that your smartphone and the device are within the range of your WiFi router.
6. If your router has MAC filtering enabled, disable it before proceeding.
7. Power up the device using a micro-USB or 7-32V terminal.
8. Press and hold the pairing button for 5 seconds until the LED indicator fast blinks.
9. Launch the Tuya Smart APP or Smart Life APP and tap the "+" icon on the top right to add a device.
10. Select "Electrician Socket (WiFi)" and confirm that the LED indicator on the device is rapidly blinking.
11. Choose the 2.4G WiFi network your mobile device is connected to and enter the correct password. Tap Next.
12. The app will automatically connect with the device. This process may take up to 1 minute.
13. Once the connection is complete, you can rename the device and save the changes.
Note: If you encounter any issues during the pairing process, refer to the FAQ section in the manual for troubleshooting tips.
Add New Comment