User Manual Q&AAnswer
Feb 27, 2025 - 10:51 PM
To raise the tower from the nested position, you will need to use the control box. The control switches on the box are of momentary action style and must be held in the "on" position to actuate the stages. Follow these steps:
1. Ensure that the power supply is connected to the TFB-H7.
2. Using the control box, raise the lower stage by holding the corresponding switch in the "on" position.
3. The TFB-H7 has an override system that prevents rotation of the flow board until the lower stage has elevated substantially from the nested position. If the lower stage is below this safety limit, the flow board will be prevented from rotating.
4. Continue raising the lower stage until it reaches the desired height.
Please refer to the "Operation" section in the user guide for more detailed instructions and safety precautions.
Add New Comment