User Manual Q&AAnswer
Feb 27, 2025 - 10:46 PM
To set up the Eltako MiniSafe2 Professional Smart Home-Controller, please follow these steps:
1. Connect the controller to a 230 V socket using the supplied AC/DC adapter.
2. Download the free GFA5 app on your mobile device.
3. Open the GFA5 app and follow the instructions provided to set up your Controller.
4. Make sure to check for any available firmware updates for the controller and install them if necessary. You can find the firmware update information at www.eltako.com/firmwareupdate-control...
5. For further assistance or support, you can visit the Eltako support page at https://www.eltako.com/kontakte.
Please note that it is important to use the product only as intended and not to modify or repair it yourself. Ensure that the product is handled carefully, away from moisture and extreme heat. Also, remember to keep the device away from open flame sources and protect it from moisture, dust, corrosive liquids, and vapors.
For safety during wireless transmission, maintain a distance of at least 20 cm from a heart pacemaker and avoid installing the unit near flammable gases or potentially explosive environments.
Please refer to the provided user manual for more detailed instructions and safety information.
Add New Comment