User Manual Q&AAnswer
Feb 27, 2025 - 10:45 PM
To start the ActronAir CRQ2-16AT Three-Phase Platinum Air Conditioner, please follow these steps:
1. Ensure that the built-in safety timers have been deactivated by waiting for at least 5 minutes from the turn-on time.
2. Check if any breakers have turned off or fuses have blown. If so, check and reset the breakers or replace the fuses.
3. Verify that the thermostat set point is correct. Check the wall control settings and ensure that the "set point" is set low enough for cooling or high enough for heating.
4. Check the master wall controller timer settings. Make sure they are set correctly according to the operating instructions.
If the system still does not start after following these steps, it is recommended to consult the user guide or contact ActronAir customer support for further assistance.
Add New Comment