User Manual Q&AAnswer
Feb 27, 2025 - 10:37 PM
To pair the camera with the parent unit on the infanti VB603 Digital Baby Monitor, follow these steps:
1. Make sure both the camera (baby unit) and the parent unit are turned on and within range of each other.
2. On the parent unit, press the "OK/Menu" key to enter the main menu.
3. Use the "Up" or "Down" key to navigate to the "Camera" option and press the "Menu" key to enter the sub-menu.
4. In the sub-menu, you will see the option for camera registration. Press the "OK/Menu" key to enter the registering screen.
5. On the back of the baby unit, locate the pair key.
6. Within 10 seconds of entering the registering screen on the parent unit, press and hold the pair key on the baby unit.
7. The parent unit will search for the camera and establish a connection. Once the pairing is successful, the camera will be registered and linked to the parent unit.
Note: The infanti VB603 Digital Baby Monitor comes with the camera already registered, so you may not need to register it again unless the camera loses its link with the parent unit.
Add New Comment