User Manual Q&AAnswer
Feb 27, 2025 - 10:34 PM
To assemble the jane ANTI-UV Parasol with Universal Flex, please follow these steps:
1. Wrap the serrated strap around the chassis tube.
2. Insert the serrated strap through the strap slot, aligning the threads.
3. Press the strap inwards while turning the wheel clockwise to engage them. Continue turning the wheel to adjust the opening to fit the size of the tube.
4. xxxx the sunshade into the top part of the flex.
5. To fit the parasol to the flex, insert the end into the hole until you feel it click into place.
6. Use the side button to press and move the rod to adjust the position. There are 5 positions available.
7. Before bending the rod, hold the plastic base with one hand to prevent sliding or breakages. Do not attempt to bend the rod from the top of the sunshade, as this could break it or detach the flex from the chassis.
8. The jane sunshades have a flexible part towards the top of the rod, which allows you to adjust the angle of the sunshade.
Please refer to the provided manual for visual illustrations and additional information on assembly.
Note: Always ensure that all components of the product are in good condition before use.
Add New Comment