How do I set up and operate the ALORAIR PureAiro HEPA Max 970 Air Scrubber? (ALORAIR PureAiro HEPA Max 970 Air Scrubber Instruction Guide)

Answer

manuals.plus

Feb 27, 2025 - 10:32 PM

To set up and operate the ALORAIR PureAiro HEPA Max 970 Air Scrubber, follow these steps:

1. Unpack the unit: Remove the air scrubber from its packaging and ensure all accessories are included.

2. Placement: Choose a suitable location for the air scrubber. It is recommended to place it in the center of the room or near the source of contamination for optimal air purification.

3. Power connection: Ensure the unit is connected to a 110/120 V AC 60 Hz power source. Use the provided power cord and plug it into a grounded outlet.

4. Power switch: Locate the power switch on the control panel. Turn it on to activate the air scrubber.

5. Fan speed control: The ALORAIR PureAiro HEPA Max 970 Air Scrubber offers two fan speed options - high and low. Adjust the fan speed according to your preference or the level of air contamination. Use the respective buttons on the control panel to switch between high and low fan speeds.

6. Monitoring: The control panel also displays the current power consumption of the unit. When the fan is off, it consumes 10.0 Amps, and with the fan on, it consumes 7.5 Amps. The high fan speed draws 2.8 Amps, while the low fan speed draws 1.6 Amps.

7. Maintenance: Regularly clean or replace the HEPA filter to ensure optimal performance. Refer to the user manual for detailed instructions on filter maintenance.

Please note that the provided information is based on the specifications mentioned in the ALORAIR PureAiro HEPA Max 970 Air Scrubber manual. For any specific or additional instructions, it is recommended to refer to the manual or contact ALORAIR customer support at 888-990-7469.