User Manual Q&AAnswer
Feb 27, 2025 - 10:09 PM
To install the Carrier SB01 Wall Ceiling Mounting Bracket, please follow these steps:
1. Determine the desired location for mounting the bracket on either the wall or ceiling. Ensure that the surface is sturdy and capable of supporting the weight of the bracket and the device it will hold.
2. Use appropriate tools to securely attach the bracket to the surface. The specific mounting hardware required will depend on the type of surface you are mounting to (e.g., screws, anchors, etc.). Please refer to the user manual for recommended hardware specifications.
3. Once the bracket is securely mounted, you can attach the RCR series device to the swivel bracket. Follow the instructions provided with the RCR series device for proper attachment.
4. Adjust the swivel bracket to the desired angle and position. The bracket allows for easy adjustment to achieve the desired coverage area.
Please note that these instructions are a general guideline. For detailed installation instructions specific to your situation, please refer to the user manual provided with the Carrier SB01 Wall Ceiling Mounting Bracket.
Add New Comment