User Manual Q&AAnswer
Feb 27, 2025 - 09:38 PM
To install the BougeRV ISE048 200W Monocrystalline Solar Panel, follow these steps:
1. Choose a suitable location: Select a location on your RV, van, truck, or trailer where the solar panel can receive maximum sunlight exposure throughout the day. Ensure that there are no obstructions such as trees or other objects that may shade the panel.
2. Mount the panel: Use the provided mounting brackets and hardware to securely attach the solar panel to your vehicle's roof or any other suitable surface. Make sure the panel is positioned at the desired angle for optimal sunlight absorption.
3. Connect the wiring: Connect the positive (+) and negative (-) wires from the solar panel to your charge controller or battery. Follow the wiring diagram provided in the user manual to ensure proper connections.
4. Test the system: Once the panel is securely mounted and wired, test the system by checking the voltage output using a multimeter. Ensure that the panel is generating the expected power output.
5. Secure the wiring: Use cable clips or zip ties to secure the wiring along the vehicle's frame or other suitable locations. This will prevent the wires from getting damaged or causing any hazards.
6. Monitor and maintain: Regularly monitor the performance of your solar panel system and keep it clean from dirt or debris. Inspect the connections periodically to ensure they are secure.
For more detailed installation instructions and diagrams, please refer to the BougeRV ISE048 200W Monocrystalline Solar Panel User Manual available on the BougeRV website at www.bougerv.com.
Add New Comment