User Manual Q&AAnswer
Feb 27, 2025 - 09:23 PM
To install the LED Solar Outdoor Wall Fixture with Motion Detector, please follow these steps:
1. Choose a suitable location for mounting the fixture. Ensure that it receives adequate sunlight during the day for optimal charging.
2. Use the provided screws and wall anchors to securely attach the fixture to the desired surface. Make sure it is mounted at a height of 6-8 meters from the ground.
3. Connect the battery cable to the fixture. The battery is a Li-Ion 2.2 mRh/3.7V-8.14Wh type.
4. Before turning on the fixture, make sure the battery is fully charged by exposing the solar panel to direct sunlight for a few hours.
5. Once the battery is charged, turn on the fixture by using the power switch.
6. The fixture has a motion detector with a detection angle of 120 degrees and a range of 6-8 meters. Adjust the angle and sensitivity of the motion sensor according to your preference.
7. The LED Solar Outdoor Wall Fixture will automatically turn on when motion is detected in the specified range and will provide illumination for the set duration.
8. To conserve battery life, the fixture has different modes of operation. Refer to the manual for instructions on changing the modes.
Please note that these are general installation instructions. For specific details and illustrations, refer to the user manual provided with the product.
Add New Comment