User Manual Q&AAnswer
Feb 27, 2025 - 08:32 PM
To set the timer on the Steinbach SPS 175-1T Filter Pump, please follow these steps:
1. Make sure that the pump's power cable is disconnected from the power supply.
2. Use a Phillips screwdriver PH1 to remove the screws of the timer cover and take the cover off.
3. Pull out the strip of plastic from underneath the battery.
4. xxxx the cover back on.
5. The timer's memory backup function is now activated.
To set the running time for the pump:
1. Press the timer button several times until the LED of the desired running time is lit. The running time options are displayed on the timer.
2. Switch on the pump by pressing the ON/OFF button on the timer. The pump will start running and automatically deactivate itself once the selected running time has expired.
3. The timer will activate the pump every day at the same time for the same running time (once every 24 hours).
Note: If you want to manually stop the pump operation, you can press the ON/OFF button on the timer. This will deactivate the timer and switch off the pump.
Please refer to the "Operation" section of the owner's manual for more information and safety instructions regarding the use of the timer and the pump.
If you have any further questions or need assistance, please contact the customer service listed on the last page of the manual.
Add New Comment