User Manual Q&AAnswer
Feb 27, 2025 - 07:58 AM
To install the Bio Green PALMA 2.0 Heater, follow these steps:
1. Choose a suitable location for the heater. Ensure that it is well-insulated and protected from heavy soiling and moisture.
2. Lay the connection cables in a way that they cannot be tripped over or crushed.
3. If using the included wet room thermostat Thermo 2, insert the mains plug into the socket of the Thermo 2. If not using the Thermo 2, insert the mains plug directly into the mains socket.
4. Make sure the heater is at least 20 inches (50 cm) away from inflammable objects and there is a distance of at least 16 inches (40 cm) between the wall and the air intake opening.
5. For the Palma 2.0 RAW in winter mode, select the "winter mode" on the selector switch and set the thermostat to maximum. The operation lamp will light up when the heater starts heating. Adjust the thermostat until the lamp switches off when the desired room temperature is reached.
6. For the Palma 2.0 in winter mode, set the desired room temperature on the Thermo 2 thermostat and select the "winter mode" on the selector switch. Set the heater thermostat to the maximum setting.
7. For summer mode, simply plug the Palma 2.0 heater directly into a mains socket. Select mode 2 on the selector switch and open the door or roof window of your greenhouse.
Always follow the safety instructions provided in the manual and consult a specialist if you have any doubts or questions regarding the installation process.
Add New Comment