User Manual Q&AAnswer
Feb 27, 2025 - 07:49 AM
To mount the Leonton PG2-0702-SFP Industrial Gigabit PoE plus Ethernet Switch, you have two options: DIN-Rail mounting and wall mounting.
DIN-Rail Mounting:
1. Use screws to install the DIN-Rail bracket on the rear side of the switch.
2. Insert the top of the DIN-Rail onto the track.
3. Lightly pull down the bracket onto the rail to secure it.
4. Check if the bracket is mounted tightly on the rail.
Wall Mounting:
1. Remove the DIN-Rail bracket from the switch by loosening the screws.
2. Place the wall mounting brackets on the top and bottom of the switch.
3. Use screws to secure the wall mounting brackets on the switch.
4. Use the hook holes at the corners of the wall mounting bracket to hang the switch on the wall.
Please refer to the "Mounting Installation" section in the Leonton PG2-0702-SFP User Manual for detailed diagrams and instructions on mounting the switch.
Add New Comment