User Manual Q&AAnswer
Feb 27, 2025 - 07:51 AM
To charge the battery of the TOOLCRAFT 2499003 Portable LED Work Light, follow these steps:
1. Make sure the light is switched OFF before charging to prevent overheating.
2. Fully charge the battery before first use and before storage.
3. When the battery needs to be recharged, the light will go OFF.
4. Connect the included power adaptor to a normal mains socket connected to the public supply.
5. Plug the power adaptor into the charging port of the work light.
6. The indicators on the light will blink during charging. If the indicators do not light up during charging, disconnect and then reconnect the power adaptor.
7. Leave the work light connected to the power adaptor until the battery is fully charged. The charging time is approximately 4.5 hours.
8. Once the battery is fully charged, you can disconnect the power adaptor from the work light.
Please note that it is important to charge the battery regularly, even if you are not using the product. Also, ensure that the port cover forms a good seal when closed to protect the IP65 ingress protection rating of the work light. For more information and safety instructions, refer to the TOOLCRAFT 2499003 Portable LED Work Light Instruction Manual.
Add New Comment