User Manual Q&AAnswer
Feb 27, 2025 - 07:44 AM
To attach the sanding paper, first, follow the directions for attaching the sanding base to the multi-tool. Align the sand paper with the sanding base and use your hand to press it firmly onto the sanding base. Press the sand paper firmly against a smooth surface for a short period, and then switch on the tool. The burr will form a non-slip bond with the outer edge of the sand paper felt. This will avoid premature wear. If one point has become worn, pull off the sandpaper, turn it 120°, and place it on again. Make sure to always wear protective gloves when working with the sharp edges of the application tools. For more detailed instructions, please refer to the "Mounting/Changing the Sand Paper" section in the instruction manual.
Add New Comment