User Manual Q&AAnswer
Feb 27, 2025 - 07:40 AM
To start the PRO POINT 8953135 11050W Gasoline Generator, follow these steps:
1. Make sure the generator is on a level surface and the engine switch is in the OFF position.
2. Inspect the generator for any signs of oil or gasoline leaks and remove any excessive dirt or debris.
3. Check the fuel level and make sure the fuel cap is securely in place.
4. Check the engine oil level and ensure it is at the recommended level.
5. Check the air filter element and clean or replace it if necessary.
6. Attach a length of 10 AWG (minimum) wire to a ground rod driven into the earth and connect the other end to the ground terminal connector on the generator.
7. Test the GFCI outlet's safety features before first use to confirm they are working correctly.
8. Turn on the fuel valve lever to the ON position.
9. Follow the engine start procedure in the engine manual.
10. Allow the generator to warm up without any load for 3 minutes.
11. Connect your appliances or devices to the generator one at a time, starting with the one with the highest current rating.
12. Monitor the generator and the connected appliances for any issues or abnormal behavior.
13. To turn off the generator, switch all breakers to the OFF position, turn the engine switch to the OFF position, and set the fuel valve lever to the OFF position.
Please refer to the PRO POINT 8953135 11050W Gasoline Generator User Manual for more detailed instructions and safety precautions.
Add New Comment