User Manual Q&AAnswer
Feb 27, 2025 - 07:11 AM
To install the RCS RWD1 36 Inch Electric Warming Drawer in your outdoor kitchen island, follow these steps:
1. Provide a 10 1/8" H x 34 1/2" W x 21" D cutout to the front of the island.
2. Use metal studs to provide support beams.
3. Pull the drawer out of the drawer casing to access the mounting holder at the front of the casing.
4. Insert the drawer casing into the island opening.
5. Secure the drawer casing with screws at the inside front top and bottom using the pre-punched mounting holes.
6. Re-assemble the drawer section into the drawer casing.
7. Apply weather-proof sealant along the edges of the warmer (not included).
8. Plug in the warmer to a properly grounded, weather-proof electrical outlet.
It is important to ensure that the warming drawer is properly grounded and installed by a qualified technician. The electrical cord has a 3-prong plug, and none of the prongs should be cut. Make sure that the island is free of cracks that could allow water or other liquids to get into the electrical controls, and keep the warming drawer away from water sprinklers.
For more detailed installation instructions and safety precautions, please refer to the RCS RWD1 36 Inch Electric Warming Drawer Instruction Manual.
Add New Comment