User Manual Q&AAnswer
Feb 27, 2025 - 07:02 AM
To load staples or nails into the Nordic POBA9017 18V Cordless Nail Gun, follow these steps:
1. Tilt the tool or lay it flat to prevent the staples or nails from dropping out while loading.
2. Press the lever (A) while pulling the slider (B) backward.
3. Place the staple or nail strip into the magazine (C), making sure not to exceed the maximum capacity of 100 staples or nails.
4. Push the slider (B) against the tacker head (D) until it snaplocks.
Important: Make sure that the staple strip is loaded with the crown aligning with the top line of the magazine (C). For nails, load the strip with the tapered end aligning with the bottom line of the magazine (C), so the brad nail head rests right into the grooves which correspond with the symbol of nail length on the tacker head (D).
Please refer to the user manual for visual illustrations and additional safety instructions.
Add New Comment