Answer

Feb 27, 2025 - 07:00 AM
To change the grinding or cutting wheel on the NORDIC POBA2550 18V 115mm Cordless Angle Grinder, follow these steps:
1. Ensure that the angle grinder is switched off and unplugged from the power source.
2. Use the face spanner stored in the additional handle to loosen the flange nut that holds the current wheel in place. Insert the face spanner into the holes on the flange nut and turn it counterclockwise to loosen the nut.
3. Once the flange nut is loose, remove it and take off the current grinding or cutting wheel.
4. Replace the wheel with a new one, ensuring that it is the correct size and type for the angle grinder. Make sure the wheel is securely seated on the spindle.
5. Use the face spanner to tighten the flange nut by turning it clockwise. Make sure the nut is tightened securely.
6. Check that the wheel is properly aligned and centered on the spindle.
7. You can now use the angle grinder with the new grinding or cutting wheel.
Please refer to the user manual for more detailed instructions and safety precautions when changing the grinding or cutting wheel.
Add New Comment