User Manual Q&AAnswer
Feb 27, 2025 - 06:58 AM
To connect the Teltonika FMB140 tracker to your computer, you have two options: using a Micro-USB cable or using Bluetooth.
1. Using a Micro-USB cable:
- Power up the FMB140 tracker with a DC voltage power supply (10-30 V) using the supplied power cable. The LED indicators should start blinking.
- Connect the device to your computer using a Micro-USB cable.
- If you haven't installed the USB drivers, you will need to do so. You can download the drivers from the Teltonika website.
- Once the drivers are installed, the device will be recognized by your computer and you can start using it.
2. Using Bluetooth:
- Power up the FMB140 tracker with a DC voltage power supply (10-30 V) using the supplied power cable. The LED indicators should start blinking.
- Turn on Bluetooth on your computer.
- Select "Add Bluetooth or other device" and then choose Bluetooth.
- Look for your device named "FMBxxx_last_7_imei_digits" (replace "xxx" with the actual digits of your device's IMEI number). Enter the default password "5555" and press Connect.
- Once connected, you can start using the device on your computer.
Please note that for both methods, you may need to install additional software such as USB drivers or Teltonika Configurator, depending on your specific requirements. Refer to the user manual for more detailed instructions on software installation and configuration.
Add New Comment