How do I install the ANOLiS Eminere Remote UV2, UV4 fixture? (Anolis Eminere Remote UV2 UV4 User Manual)

Answer

manuals.plus

Feb 27, 2025 - 06:36 AM


To install the ANOLiS Eminere Remote UV2, UV4 fixture, follow these steps:

1. Mounting the fixture: The fixture can be arranged in any orientation on a flat, non-flammable surface using the two mounting brackets provided. The brackets can be tilted by 30° for proper positioning.

2. Connection to driver: The fixture must be installed by a qualified electrician in accordance with national and local electrical and construction codes. The Eminere Remote UV modules should be connected to the E-Box Remote or E-Box Remote Basic as specified in the technical specifications section of the manual.

3. Wiring of the junction box: Unscrew the four screws on the cover of the junction box and remove the cover and gasket. Remove the end cap from the cable glands before passing cables through them. Pass the power/data cables through the cable glands and connect them to the connection blocks. Place the gasket on the junction box and  xxxx  the cover back on. Ensure all cable glands and screws are firmly secured.

4. Fill the junction box with synthetic resin: After checking all connections, fill the junction box with synthetic resin according to the instructions provided on the resin bag. Make sure to insert the end cap in any unused cable gland before filling.

Please refer to the user manual for more detailed instructions and diagrams for the installation process.