User Manual Q&AAnswer
Feb 27, 2025 - 06:55 AM
Installation of the TRIPP-LITE DMTBS13 Tablet Mount for 12.9-Inch Tablets is a straightforward process. Here is a step-by-step guide to help you with the installation:
1. Start by unpacking the package and ensuring that you have all the components listed in the Component Checklist.
2. Identify the location where you want to install the tablet mount. It should be a sturdy and secure surface.
3. Place the mount base on the desired location and mark the mounting holes using a pencil or marker.
4. Using appropriate screws and wall anchors (not included), securely attach the mount base to the wall or surface. Make sure the mount base is level.
5. Next, attach the tablet holder to the mount arm. Align the holes on the tablet holder with the holes on the mount arm and insert the provided screws. Tighten the screws to secure the tablet holder in place.
6. Adjust the tablet holder to the desired viewing angle. The mount arm allows for tilt and swivel adjustments, providing flexibility in positioning your tablet.
7. Once you have set the desired viewing angle, tighten the adjustment knobs on the mount arm to secure the position.
8. Now, place your 12.9-inch tablet into the tablet holder. The tablet should fit securely and snugly in the holder.
9. Ensure that the tablet is properly positioned and adjust the tablet holder as needed to achieve the desired orientation.
10. Finally, double-check all the screws and knobs to ensure they are tightened securely.
Please note that this answer is based on general installation guidelines. For specific instructions and illustrations, it is recommended to refer to the official installation guide provided by TRIPP-LITE.
Add New Comment