User Manual Q&AAnswer
Feb 27, 2025 - 06:07 AM
To connect the DEVELCO PRODUCTS H6500189 Smart Button to a Zigbee network, follow these steps:
1. Press the button on the Smart Button to activate the search for a network. The Smart Button will start searching for a Zigbee network to join. During this process, the yellow LED will flash.
2. Make sure that the Zigbee network is open for joining devices and will accept the Smart Button.
3. Wait for the LED to stop flashing. This indicates that the Smart Button has successfully joined the Zigbee network.
4. If the scanning process times out, you can restart it by giving a short press on the button.
Note: It is important to ensure that the Zigbee network is open for joining devices and that the Smart Button is within range of the network for successful connection.
For more detailed information and troubleshooting, please refer to the DEVELCO PRODUCTS H6500189 Smart Button Installation Guide.
Add New Comment