User Manual Q&AAnswer
Feb 27, 2025 - 06:05 AM
To install the DEVELCO PRODUCTS H6500113 Wireless Keypad, please follow the steps outlined in the installation manual provided. Here is a summary of the installation process:
1. Open the casing of the device by removing the xxxx at the bottom of the device.
2. Use the included screws to mount the back plate of the device on the wall. Alternatively, you can use the double adhesive tape to mount the backplate.
3. Insert batteries into the device, ensuring the correct polarity.
4. The Keypad will start searching for a Zigbee network to join. While searching, the yellow LED will flash.
5. If the scanning times out, a short press on the menu button inside the device will restart it.
6. After connecting the device to a network, attach the device to the back plate by hooking the device to the top of the back plate and pushing it against the back plate.
7. Finally, reinsert the xxxx at the bottom of the device.
For more detailed instructions and precautions, please refer to the DEVELCO PRODUCTS H6500113 Wireless Keypad Installation Guide.
Add New Comment