Answer

Feb 27, 2025 - 05:58 AM
To connect the fornello ESP8266 WIFI Module to your device, you will need the following accessories: a signal cable and a power plug.
1. Signal cable connection: Pay attention to the position of the red line and the white line on the signal cable. Connect the red end of the cable to the A of the connection line and the other end to the + of the main control board. Connect the white end of the cable to the B of the connection line and the other end to the - of the main control board. Make sure not to reverse the connection, as it will prevent communication.
2. Power plug connection: Connect the power plug to a 230V power supply. Connect the black and white line of the power cord to the + of the connection line and the - of the connection line, respectively. Ensure that the connection is not reversed, as it will prevent the module from receiving power.
Please refer to the provided connection diagram in the manual for a visual representation of the connections.
Note: It is important to follow the correct connection steps to ensure proper functionality and communication between the WIFI module and your device.
Add New Comment