Answer

Feb 27, 2025 - 05:58 AM
To install the EMTEK Tubular Sectional Entry Set Single Cylinder Deadbolt on your door, please follow the steps outlined in the installation guide provided with the product. Here is a general overview of the installation process:
1. Door Prep: Refer to the template provided in the installation guide for door prep specifications. This will include information on the required hole sizes and locations on the door.
2. Door Jamb Prep: Ensure that the door jamb is properly prepared to accommodate the deadbolt. This may involve chiseling out a recess for the strike plate and drilling additional holes for the mounting screws.
3. Outside Installation: The plates and grips for the outside installation will vary depending on the style of the EMTEK Tubular Sectional Entry Set Single Cylinder Deadbolt. Refer to the specific instructions provided in the installation guide for your particular style.
4. Inside Installation: The inside installation of the deadbolt is typically straightforward. Follow the instructions provided in the installation guide (IN4-ENTSETSGSEC REV 21A) for the specific steps and details.
It is important to carefully read and follow the instructions provided in the installation guide to ensure proper installation and functionality of the EMTEK Tubular Sectional Entry Set Single Cylinder Deadbolt. If you have any specific questions or concerns during the installation process, please consult the manual or contact EMTEK customer support for further assistance.
Add New Comment