User Manual Q&AAnswer
Feb 27, 2025 - 05:40 AM
To adjust the focus and acquire depths with the Dino-Lite AM73915 Series Depth Acquisition with Edge Plus, follow these steps:
1. Adjust the focus to a plane of interest. This position will be considered the reference plane as 0.
2. To acquire depths, readjust the focus by either of the following methods:
- Middle-click on a point of interest to autofocus. If necessary, scroll the mouse wheel to further readjust the focus.
- Alternatively, press the "Ctrl" key and scroll the mouse wheel to change the focus manually.
- The cursor will indicate that the refocus mode is active and that the focus can be readjusted. A positive focus shift refers to a plane below the reference plane.
3. To exit the refocus mode, left-click anywhere on the preview window or press the "ESC" key.
Please refer to the Dino-Lite AM73915 Series Depth Acquisition with Edge Plus User Guide for more detailed instructions and information on the maximum depth range and tolerance at different magnifications.
Add New Comment