User Manual Q&AAnswer
Feb 27, 2025 - 05:35 AM
To install the elero 11 NHK Tubular Motors with Manual Override, follow these steps:
1. Mounting instructions for installation in round tubes:
- Cut a slot at the end of the tube on the drive side.
- Push the drive into the tube so that the drive lug engages in the slot.
- xxxx or rivet on the coupling (adaptor).
2. Mounting instructions for installation in profile tubes:
- Push the drive with the matching drive adaptor and crown into the profile tube.
- Install the shaft with drive and counter support so that the limit switch adjustment mechanism is accessible.
- Secure the counter support to prevent axial movement.
- Secure the drive axially in the support.
3. Connect the drive to the assembly cable matching the core colors and allow it to run downwards until the limit switch cuts out.
4. Attach the roller shutter to the shaft.
Please note that it is important to follow the safety instructions provided in the manual. Only authorized specialist personnel should make the connections to the 230V mains. Regularly check the system for wear or damage. Follow the regulations of the local energy supply company and the regulations for wet and damp rooms when making the connections. Use unmodified original elero electrical parts.
For additional assembly instructions for tubular motors with manual override, keep people away from the system when using manual operation. Attach the manual override in an easily accessible location. Insert the crank handle in the drive and fasten it. Ensure that you don't go past the adjusted limit switch.
Please refer to the elero 11 NHK Tubular Motors with Manual Override Instruction Manual for more detailed instructions and safety information.
Add New Comment