How do I install the gas countertop charbroiler? (CPG 351CLCPG15NL Gas Countertop Charbroilers Owner's Manual)

Answer

manuals.plus

Feb 27, 2025 - 05:19 AM


To install the gas countertop charbroiler, please follow the instructions provided in the owner's manual. Here are the general steps:

1. Ensure that the appliance is disconnected from the gas supply before installation.
2. Place the charbroiler on a sturdy and level countertop surface, ensuring there is enough clearance around the unit for proper ventilation.
3. Connect the gas supply to the appliance using a flexible gas hose or rigid pipe, following local codes and regulations.
4. Install the individual shutoff valve for the appliance, which should be easily accessible for operation and maintenance.
5. Check for gas leaks by applying a soapy water solution to all gas connections. If bubbles appear, there is a leak. In this case, turn off the gas supply and tighten the connections or seek professional assistance.
6. Connect the charbroiler to a properly grounded electrical outlet if applicable.
7. Follow the instructions in the manual for lighting the burners and adjusting the gas pressure, if necessary.
8. Once the installation is complete, review the safety precautions and operating guidelines in the manual before using the charbroiler.

Please note that these are general installation steps, and it is important to refer to the specific instructions provided in the owner's manual for the 351CLCPG15NL gas countertop charbroiler model for accurate and detailed installation guidance.