How do I install the Paul Neuhaus 6960-55 Inigo LED Ceiling Spotlight? (Paul Neuhaus 6960-55 INIGO LED Ceiling Spotlight Instruction Guide)

Answer

manuals.plus

Feb 27, 2025 - 05:04 AM

Installation of the Paul Neuhaus 6960-55 Inigo LED Ceiling Spotlight is a straightforward process. Here are the steps to follow:

1. Gather the necessary tools: Before starting the installation, make sure you have the required tools, including a screwdriver, wire strippers, and a ladder or step stool if needed.

2. Turn off the power: Locate the circuit breaker or fuse box and turn off the power supply to the area where you will be installing the spotlight. This step is crucial for your safety.

3. Remove the existing fixture (if applicable): If you are replacing an old light fixture, carefully remove it by unscrewing any screws or nuts holding it in place. Disconnect the wiring, but make sure to note the wire connections for later reference.

4. Mount the ceiling bracket: Take the ceiling bracket provided with the spotlight and attach it to the electrical box in the ceiling using the screws provided. Ensure that the bracket is securely fastened.

5. Connect the wires: Connect the wires from the spotlight to the corresponding wires in the electrical box. Typically, you will need to match the black wire (hot) to black, white wire (neutral) to white, and green or copper wire (ground) to green or bare copper. Use wire connectors to secure the connections and ensure they are tight.

6. Attach the spotlight: Carefully align the spotlight with the ceiling bracket and twist it clockwise to lock it in place. Make sure it is securely attached and does not wobble.

7. Restore power and test: Once the spotlight is installed, turn the power back on at the circuit breaker or fuse box. Test the spotlight by flipping the switch and ensuring it illuminates properly.

It is important to note that these instructions are a general guide, and it is always recommended to consult the specific manual provided by the manufacturer for detailed installation instructions. If you encounter any difficulties or are unsure about any step, it is advisable to seek the assistance of a qualified electrician.