User Manual Q&AAnswer
Feb 27, 2025 - 05:02 AM
Installation of the EMTEK Key in xxxx /Lever Lock with 8 Style Rosette involves several steps. Here is a step-by-step guide based on the provided manual:
1. Start by preparing the lock assembly. Install the strike plate and latch using the provided #8 x 3/4" wood screws.
2. To remove the inside rosette, loosen the set xxxx on the inside xxxx /lever using the provided hex wrench. Then, unthread the rosette nut counterclockwise to remove it from the housing before installing it on the door.
3. Install the inside chassis by fastening it to the door using the provided #8-32 x 1½" pan head machine screws.
4. Secure the inside rosette to the door by threading the nut clockwise onto the stem. Make sure to tighten the set xxxx after placing the xxxx /lever on the stem.
5. Now, let's focus on the key-in xxxx /lever lock itself. Rotate the key counterclockwise 90º while pressing the wire into the hole.
6. Slide the xxxx /lever off the stem.
7. After re-pinning the cylinder, insert the xxxx /lever onto the stem.
Please note that this answer is based on the provided installation guide. For more detailed instructions and illustrations, it is recommended to refer to the official manual provided by EMTEK Products, Inc.
Add New Comment