User Manual Q&AAnswer
Feb 27, 2025 - 04:49 AM
To set up the urmet H.265 IP Camera, follow these steps:
1. Verify the electrical specifications of the device are suitable for the available power source.
2. Connect the device to an electrical outlet using the provided power supply.
3. Make sure to use a switch disconnector for connecting the device to the electrical outlet.
4. Read and follow the safety precautions mentioned in the user guide to prevent any risks of fire or electrocution.
5. Install the camera in a suitable location, away from rain or humidity, and use a protective case if necessary.
6. Avoid pointing the camera directly at sunlight or other intense sources of light, as well as reflective objects.
7. Consider using the AUTO-IRIS lens for optimal performance in changing light environments.
8. Ensure the camera is placed on a stable support to prevent it from falling and getting damaged.
9. If water or any other material penetrates the camera, stop using it and contact the authorized retailer or installer.
10. Do not cover the device with any cloth while using it to prevent deformation or overheating.
11. Avoid placing magnets or magnetized objects near the camera to prevent functional anomalies.
12. Use the camera in suitable environmental conditions, avoiding smoke, steam, humidity, dust, or intense vibrations.
13. Allow the camera to adapt to a new environment after moving it from warm to cold or vice versa.
14. Check the device for any damage after removing the packaging.
15. Ensure the working environment is not too humid and the temperature is within the indicated range.
16. Clean the device using a dry cloth or a humid cloth with a neutral cleanser if necessary.
17. Do not use spray cleansers or volatile liquids for cleaning, and disconnect the device from the electrical outlet before cleaning.
18. Familiarize yourself with the video recording capabilities of the camera and perform a demo video to verify its functionality.
19. Follow the privacy and copyright laws applicable in your country when using the camera for surveillance purposes.
20. Contact customer service for firmware upgrades if needed.
21. Configure the network settings of the camera using the provided software or web page.
22. Change the default password and customize it for security purposes.
23. Use the SearchConfig Tool V2.0 software to detect the device on the network and perform basic configurations.
24. Dispose of the product correctly by following the guidelines provided in the user guide.
For more detailed information and instructions, please refer to the complete user manual available on the Urmet website.
Add New Comment