Answer

Feb 27, 2025 - 04:44 AM
To install the EMTEK Electronic Keypad Entry Set, follow these steps:
1. Door Prep:
- Measure and mark the desired height for the keypad and deadbolt on the door.
- Drill a hole for the keypad and deadbolt according to the specifications provided in the installation guide.
- Ensure the hole is clean and free of debris.
2. Door Jamb Prep:
- Measure and mark the location for the strike plate on the door jamb.
- Chisel out the area for the strike plate, ensuring it is flush with the door jamb.
3. Install Latches:
- Insert the latch assembly into the hole on the edge of the door.
- Secure the latch assembly with the provided screws.
- Test the latch to ensure it operates smoothly.
4. Install Grip and Interior Lever:
- Attach the grip and interior lever to the door using the provided screws.
- Ensure the lever is properly aligned and functioning correctly.
5. Install Electronic Lock:
- Follow the specific instructions provided in the installation and programming guide for your electronic deadbolt model.
- Typically, you will need to insert the deadbolt assembly into the hole on the edge of the door and secure it with screws.
- Connect the wiring according to the guide, ensuring proper alignment and functionality.
- Test the electronic lock to ensure it operates correctly.
Please note that the exact steps may vary depending on the specific model of the EMTEK Electronic Keypad Entry Set you have. It is essential to refer to the provided installation and programming guide for detailed instructions specific to your product.
Add New Comment