Answer

Feb 27, 2025 - 04:41 AM
To install the Trimco UHF212 Hands Free Slide Lock, please follow the step-by-step instructions provided in the installation guide. Here is a summary of the installation process:
Step 1: Remove all existing door hardware, including the deadbolt if needed.
Step 2: Install the interior indicator decals on the back of the interior assembly, ensuring that the locked decal is shown through the correct indicator window.
Step 3: Install the interior assembly by inserting the studs through the carrier. Use tape to hold the assembly in place while the exterior is being installed.
Step 4: Install the indicator with the left or right decal, depending on the door handing. Install the exterior pull loosely to the interior assembly studs.
Step 5: Use a level or measure from the door edge to align the interior assembly and exterior pull.
Step 6: Install the exterior pull door screws. Install the interior assembly mounting screws and latch face.
Always refer to the Trimco website (www.trimcohardware.com) for the latest documentation and installation video.
Please note that the Trimco UHF212 Hands Free Slide Lock is only compatible with 1-3/4" thick doors and follows ANSI 161 cylindrical door preparation. If you have any further questions or need assistance, please contact Trimco customer service at the provided contact information.
Add New Comment