User Manual Q&AAnswer
Feb 27, 2025 - 04:40 AM
To assemble the optional plow blade for the TOPMAQ 31455 mini tracked dumper, please follow the instructions provided in the instruction manual:
1. Mount the mounting bracket to the blade using M8×30 hex bolts, washers, and nuts.
2. Position the pivot bracket inside the mounting bracket and align it with the mounting bracket holes. Secure it with an M20×95 hex bolt, washers, and nut.
3. Insert the shorter control lever into the longer lever. Align the holes and fasten it with an M8×40 hex bolt, washers, and nut.
4. Attach the control lever to the guide tube. Line up the holes and fasten it with an M8×35 bolt, washers, and nut.
5. Insert the handle grip into the holder.
6. Secure the support bracket into the control lever with pin 10×60 and a bridge clip.
7. Install the mounting bracket base with two M10×30 bolts and washers.
8. Finally, install the already assembled plow blade to the trackbarrow as shown.
Please refer to the parts schedule provided in the manual for a detailed list of all the components and their quantities required for the assembly.
Note: It is important to ensure that all bolts, washers, and nuts are tightened securely during the assembly process.
Add New Comment