Answer

Feb 27, 2025 - 04:26 AM
To install the EMTEK IN4-PRIVBLTINST Thumbturn Privacy Bolt on your door, please follow the steps outlined in the installation guide provided with the product. Here is a general overview of the installation process:
1. Door Prep: Refer to the template included in the installation guide for door prep specifications. This will provide you with the necessary measurements and markings for drilling holes on your door.
2. Door Jamb: Ensure that the door jamb is properly aligned and prepared to accommodate the privacy bolt. Make sure there are no obstructions or misalignments that could hinder the installation process.
3. Install Latch: Begin by installing the latch mechanism on the edge of the door. Follow the specific instructions provided in the installation guide to properly align and secure the latch.
4. Install Privacy Bolt: Once the latch is installed, proceed to install the privacy bolt. This is the component that will engage with the latch to secure the door. Again, refer to the detailed instructions in the installation guide for the specific steps and measurements required for this installation.
It is important to carefully read and follow the instructions provided in the installation guide to ensure a proper and secure installation of the EMTEK IN4-PRIVBLTINST Thumbturn Privacy Bolt. If you encounter any difficulties or have further questions, it is recommended to consult with a professional or contact EMTEK customer support for assistance.
Add New Comment