User Manual Q&AAnswer
Feb 27, 2025 - 04:23 AM
To clean and refill the Parabath Unit, follow these steps:
1. Unplug the unit.
2. Empty the paraffin tank by laying the cover crosswise on the tank and placing a length of rope with knots on each end into the paraffin, draping it over the cover. Allow the paraffin to cool and solidify, which usually takes about 24 hours.
3. Plug in the unit just long enough for the paraffin to loosen in the tank.
4. Unplug the unit and pull out the rope with the paraffin attached in block form.
5. Clean the tank using paper towels and a mild, non-abrasive, non-chlorine based household cleanser to remove any remaining paraffin residue. Do not use water to clean the unit or expose it to water.
6. Refill the tank with Parabath Universal Paraffin Refills following the initial use instructions.
Please note that it is important to clean the unit when significant discoloration or yellowing of the paraffin is noticed or when excessive sediment is observed in the tank. Make sure to unplug the unit before attempting to clean and refill it.
Add New Comment