User Manual Q&AAnswer
Feb 27, 2025 - 04:11 AM
To set up the TOPKODAS GTM1 Security Access Control System for remote monitoring and control, follow these steps:
1. Install the SeraNova app:
- Download and install the SeraNova app on your mobile device from the app store.
- The app is available for both Android and iOS devices.
2. Connect the GTM1 system to the internet:
- Ensure that the GTM1 system is connected to a stable internet connection.
- You can use either a wired Ethernet connection or connect it to your Wi-Fi network.
3. Register your GTM1 system on the SeraNova app:
- Open the SeraNova app on your mobile device.
- Tap on the "Register" or "Add Device" option.
- Follow the on-screen instructions to add your GTM1 system to the app.
- You may need to enter the device's serial number or scan a QR code provided with the system.
4. Configure remote monitoring and control settings:
- Once your GTM1 system is registered on the SeraNova app, you can access its settings.
- Go to the "Settings" or "Device Settings" section in the app.
- Enable the remote monitoring and control options you prefer, such as push notifications, SMS commands, or call alarms.
- You can also set up event lists and choose how you want to receive alarm events.
5. Test the remote monitoring and control:
- After configuring the settings, you can test the remote monitoring and control features.
- Trigger a test alarm event, such as opening a protected door or simulating a fire alarm.
- Check if you receive the alarm notifications on your mobile phone or other designated devices.
- Ensure that the remote control functions, such as arming or disarming the system, are working as expected.
For further assistance or more information on the TOPKODAS GTM1 Security Access Control System, you can contact TOPKODAS via email at info@topkodas.lt or visit their website at https://www.topkodas.lt. The product manual may also provide additional details on the setup process and troubleshooting tips.
Add New Comment