User Manual Q&AAnswer
Feb 27, 2025 - 04:09 AM
To adjust the brakes hardness on the RUDDO/RUDDO+ pedals, you can add or remove springs located in the rear part of each pedal. Use an Allen key n.3 to unscrew one of the screws from the rear part of the pedal. Add or remove the spring depending on your preference, and then xxxx the removed xxxx back to its original position. Repeat this process with the other pedal.
For adjusting the rudder hardness, you can add or remove one of the springs on each side of the rudder pedals. Use an Allen key n.2 to remove the black cover of the device. Remove the white axis using a flat head screwdriver. There are a total of 8 springs placed in 4 guides. Add or remove springs based on your preference. xxxx back the axis using the screwdriver and place back the black cover using the screws removed earlier.
Please note that the Allen keys required for these adjustments are not included in the package.
Add New Comment