User Manual Q&AAnswer
Feb 27, 2025 - 03:43 AM
To connect your sources to the PA66MK2 amplifier, follow these steps:
1. Make sure the AC power is disconnected before making any connections.
2. Use RCA cables to connect each source to one of the available Source Inputs on the amplifier. If your source has a 3.5mm stereo output, you may need a 3.5mm stereo to RCA cable.
3. Note that Input 1 can be used as a global input for all zones. If you connect a source to Input 1 and apply 12VDC to the PA-IN jack (tip is positive), source 1 will broadcast to all zones. If no 12VDC is applied, then the first input will operate normally.
For more detailed instructions and illustrations, please refer to the "CONNECTING THE SOURCES" section in the user guide provided.
Add New Comment