User Manual Q&AAnswer
Feb 27, 2025 - 02:54 AM
To install the driver for the DELTA IFD6500/IFD6530 USB/RS-485 Communication Interface, please follow these steps:
1. Download the USB driver from the official DELTA website (https://downloadcenter.deltaww.com/en...).
2. Extract the downloaded driver file to a folder on your computer. Note: Do not connect the IFD6500/IFD6530 to your PC before extracting the driver file.
3. Make sure you have a folder named "SiLabs" under drive C on your computer.
4. Connect the IFD6500/IFD6530 to your PC.
5. The driver installation should start automatically. If it doesn't, navigate to the extracted driver folder and run the setup.exe file.
6. Follow the on-screen instructions to complete the driver installation.
7. Once the driver installation is finished, the IFD6500/IFD6530 should be ready to use.
Please refer to the instruction manual for any additional information or troubleshooting steps.
Add New Comment