User Manual Q&AAnswer
Feb 27, 2025 - 02:43 AM
To set up the temperature control feature on the TOPKODAS GTalarm2 Cellular Smart Home Security System, please follow the steps below:
1. Ensure that your GTalarm2 system is properly installed and connected to the power supply and GSM network.
2. Access the system's settings menu by navigating to the "Settings" section on the control panel or through the mobile app.
3. Locate the "Temperature Control" or "Heating Automation" option in the settings menu.
4. Set the desired temperature thresholds: T1 (lower limit) and T2 (upper limit). These values will determine when the heating system should be activated.
5. Enable the temperature control feature by toggling the corresponding switch or selecting the "Enable" option.
6. Save the settings and exit the menu.
Now, when the temperature falls below T1, the GTalarm2 system will automatically start the heating process until the temperature reaches T2. You can also control the heating system remotely using your mobile phone by accessing the system through the mobile app. From there, you will have the ability to adjust the temperature settings and turn the heating on or off as needed.
For more detailed instructions and information, please refer to the user manual provided with the TOPKODAS GTalarm2 Cellular Smart Home Security System.
Add New Comment