Answer

Feb 27, 2025 - 02:41 AM
To install the EMTEK Stretto 1.5x5 Passage Door Lock, follow these steps:
1. Door Prep: Ensure that the door is properly prepared for installation. The dimensions provided (A, B, and C) are reference points, and actual door jamb prep dimensions may vary. Use the strike plate outline edges to locate the xxxx holes on the strike plate with the center line on the jamb.
2. Install Latch: Install the latch on the edge of the door. Ensure that the latch is properly aligned with the strike plate on the door jamb. Secure the latch in place using the provided screws.
3. Install Strike Plate: Fasten the strike plate on the door jamb using the provided #8 wood screws. Ensure that the strike plate aligns with the latch on the door.
4. Install Outside and Inside Trims: Depending on the style of handles you have, install the outside and inside trims accordingly. Refer to the specific instructions provided with your chosen handle style for proper installation.
Please note that this is a general overview of the installation process. For detailed instructions and illustrations, refer to the EMTEK Stretto 1.5x5 Passage Door Lock Installation Guide that came with your product.
Add New Comment