Answer

Feb 27, 2025 - 02:15 AM
To determine the lever/ xxxx location and plate orientation for installing EMTEK Non-Keyed Sideplates, you need to follow these steps:
1. Before drilling any holes, determine the lever/ xxxx location and plate orientation. This is important as it varies depending on the style of the sideplate. Refer to the product manual or instructions for your specific style to identify the correct orientation.
2. Start by preparing the door. This may involve drilling holes or making necessary adjustments to accommodate the sideplate and latch.
3. Install the latch according to the provided instructions. The latch is an essential component that allows the sideplate to function properly.
4. Next, install the inside trim plate. Make sure to align the sideplate using the edge guide provided. The plates and lever/ xxxx may vary depending on the style, so refer to the manual for specific instructions on how to install the inside trim plate.
5. Install the outside trim plate, following the instructions provided. Ensure that it aligns properly with the inside trim plate.
6. Tighten the lever/ xxxx securely to ensure it is properly attached to the sideplate. Use the appropriate tools, as specified in the manual, to tighten the lever/ xxxx .
7. After the lock has been installed, tighten the set xxxx using an Allen wrench. This will help secure the lever/ xxxx in place and prevent it from loosening over time.
8. If you are installing a dummy plate, follow the instructions provided to properly install the mounting plate and adjust it for level.
9. Finally, install the sideplate itself, making sure it aligns correctly with the trim plates and the latch. Use the provided screws or optional thru bolts (if applicable) to secure the sideplate in place.
Remember to consult the product manual or instructions specific to your EMTEK Non-Keyed Sideplates for detailed installation steps and any additional information that may be relevant to your particular style.
Add New Comment