How do I install the LinmoreLED ESSENTIALS Series Commercial and Industrial LED Fixtures? (LinmoreLED ESSENTIALS Commercial LED Fixtures Instruction Manual)

Answer

manuals.plus

Feb 27, 2025 - 02:09 AM

To install the LinmoreLED ESSENTIALS Series Commercial and Industrial LED Fixtures, follow these steps:

1. Consult a local licensed electrician or electrical contractor before starting the installation.
2. Review all the warnings provided in the instruction manual.
3. Inspect the packaging for any signs of damage. If the packaging is damaged, notify the carrier immediately.
4. Unpack the fixtures from the packaging and properly dispose of the packaging materials.
5. Inspect the fixtures for any damage. If any damage is observed, take photographs and contact LinmoreLED.
6. Turn off the electricity at the main circuit breaker, panelboard, fuse box, or disconnect before installing the fixture. Do not attempt to install the fixture with the power on.
7. Ensure that the location where the fixture will be installed has the properly rated fixture.
8. Make sure the mounting surface is capable of supporting the weight of the fixture.
9. If mounting near the ceiling, ensure that there is at least a 4-inch distance between the fixture and the ceiling. Increase the distance from the ceiling at high ambient temperatures.
10. Follow the specific installation instructions based on the mounting option chosen (Cable Ready Mount, Surface Mount, Hook and Loop, Rigid Stem Mounting, Plate Mount, or Hanger Mount). These instructions are provided in detail in the manual.
11. Make the final electrical connections according to the wiring instructions provided in the manual. Ensure that all electrical connections conform to the National Electrical Code and applicable local regulations.
12. Neatly arrange the wires in the wireway and ensure that all connections are secure and no bare wires are exposed.
13. Close the wireway cover and insert the safety xxxx provided into the hole in the wireway cover.
14. Turn on the electricity at the circuit breaker, panelboard, or fuse box. The fixture should illuminate. If it doesn't, refer to the troubleshooting instructions in the manual or contact technical support.

Please note that this is a general overview of the installation process. For more detailed instructions and specific information related to your fixture model, refer to the LinmoreLED ESSENTIALS Series Commercial and Industrial LED Fixtures Instruction Manual.